While its cutting capabilities are extraordinary, the finish can also surprise you. With the capability of removing scratches as deep as P1000 CarPro ClearCut is the perfect tool for a 2-step job on any paint or even 1-step on many med-to-hard paintworks. Extremely fast cut No wax, fillers, or silicone Body shop safe How to Use: For D/A Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea-sized drops of ClearCut. Spread product across a section. Raise speed to MED/HIGH. Use MIN pressure for the first 2-3 passes and increase with each pass. When scratches disappear or the polish becomes clear, wipe clean with an MF towel. Clean pad. Move to the next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7. For Rotary: Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea-sized drops of ClearCut. Spread product across a section. Keep polisher on LOW speed with LOW pressure. Use MIN pressure for the first 1-2 passes increasing pressure ever so slightly. Work with max 1000-1200 RPM. When scratches disappear or the polish becomes clear, wipe clean with an MF towel. Clean pad. Move to the next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.
